NEC Univerge SV9100 - CODEC Filter Setup for Analog Station Port

Issue 4.0
SV9100 Programming Manual 2-737
Description
Use Program 82-07 : CODEC Filter Setup for Analog Station Port to set the filter value of the CODEC
(QSLAC) filter of each analog port.
Conditions
None
Feature Cross Reference

Direct Station Selection (DSS)
Program 82 : Basic Hardware Setup for Extension
82-07 : CODEC Filter Setup for Analog Station Port
Level:
IN
Input Data
Station Port
Number
1~ 960
CODEC Filter Type Default
0 = No filter
1 = Type 1
2 = Type 2
3 = Type 3
4 = Type 4
3