NEC Univerge SV9100 - Demonstration Setting

Issue 4.0
2-666 Program 51 : NetLink Service
Description
Use Program 51-15: Demonstration Setting to automatically set the minimum setting values in
NetLink. A system reset occurs after this command is executed.
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-15 : Demonstration Setting
Level:
IN
IMPORTANT
This program is available only via telephone programming and not through PC
Programming.
Input Data
Menu Number
1 = Primary automatic setting
2 = Secondary 1 - automatic operation setting
3 = Secondary 2 - automatic operation setting
4 = Secondary 3 - automatic operation setting