NEC Univerge SV9100 - IP Trunk Data Setup

Issue 4.0
2-180 Program 14 : Trunk, Basic Setup
Description
Use Program 14-18 : IP Trunk Data Setup to define the basic setting of each IP Trunk.
Program 14 : Trunk, Basic Setup
14-18 : IP Trunk Data Setup
Level:
IN
Input Data
Trunk Port Number 001~400
Item
No.
Item Input Data Default
01
IP Trunk Type
This indicates the IP Trunk type. (Read
Only)
0 = None
1 = SIP
2 = H.323
3 = CCIS
0
02
System ID (SIP Trunk)
This indicates NetLink System ID of the
trunk when multiple SIP trunks for
NetLink is enabled. (Read Only)
0 ~ 50
0
03
P2P Mode (SIP Trunk)
Select whether or not peer-to-peer
connection method is used for the SIP
Trunk.
0 = Disable
1 = Enable
0
04
Video Mode (SIP Trunk)
Select whether or not the Video mode is
used for the SIP Trunk.
0 = Disable
1 = Enable
0
05
SIP Profile
1 = Profile 1
2 = Profile 2
3 = Profile 3
4 = Profile 4
5 = Profile 5
6 = Profile 6
 With Version 2000
or lower CPU
Software only two
SIP Profiles are
supported.
1