NEC Univerge SV9100 - Conversation Recording Destination for Trunks

Issue 4.0
SV9100 Programming Manual 2-175
Description
Use Program 14-09 : Conversation Recording Destination for Trunks to set the ACI Conversation
Recording destination for each trunk.
Conditions
None
Feature Cross Reference

Analog Communications Interface (ACI)
Program 14 : Trunk, Basic Setup
14-09 : Conversation Recording Destination for Trunks
Level:
IN
NOTE

If both Programs 14-09 and 15-12 define a destination, the destination in Program 15-
12 is followed.
Input Data
Trunk Port Number 001~400
Item
No.
Item Input Data Default
01
ACI Recording Destination Extension Number
Enter the ACI extension number where the trunk calls
should be recorded.
Maximum eight digits
No Setting
02
ACI Automatic Recording for Incoming Calls
Determine if incoming trunk calls should be
automatically recorded in the ACI.
0 = Off
1 = On
0