NEC Univerge SV9100 - SIP Trunk Basic Information Setup

Issue 4.0
SV9100 Programming Manual 2-767
Description
Use Program 84-14 : SIP Trunk Basic Information Setup to define the basic setup for SIP trunks.
Program 84 : Hardware Setup for VoIP
84-14 : SIP Trunk Basic Information Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default Profile 1~6
06
SIP Trunk Port Number
1~65535
Profile 1 = 5060
Profile 2 = 5062
Profile 3 = 5090
Profile 4 = 5092
Profile 5 = 5094
Profile 6 = 5096
With Version 2000 or
lower CPU Software
only two SIP Profiles
are supported.
07
Session Timer Value
1~65535
0
08
Minimum Session Timer Value
1~65535
1800
09
Called Party Information
0 = Request URI
1 = To Header
0
10
URL Type
0 = SIP-URL
1 = TEL-URL
0
11
URL/To HeaderSetting Information
0: If 10-29-12 and 10-29-13 are set
for the Proxy server domain, the value
is put. The value of 10-29-11 is put on
the URL/TO header when not set.
1: Information is acquired and put
from 10-28-01/10-28-02 of the SIP
UA domains.
0 = Proxy Server Domain
1 = SIP UA Domain
0