Issue 4.0
SV9100 Programming Manual 2-227
Description
Use Program 15-18 : Virtual Extension Key Enhanced Options to define the operation when a Virtual
Extension Key is pressed.
Program 15 : Extension, Basic Setup
15-18 : Virtual Extension Key Enhanced Options
Level:
IN
Input Data
Extension Number including Virtual Extensions 001 ~ 960
Item
No.
Item Input Data
Defaul
t
Related
Program
01
Virtual Extension Key Operation Mode
Define if calls to a Virtual Extension Key land on the
Virtual or on the extension/ CAP/CO appearance.
This is assigned for the Virtual Extension
Key, not the extension it resides on.
0 = Release
1 = Land on the
key
0 20-04-01
02
Display mode when placing a call on Virtual
Extension Key
Defines if calls to or from a Virtual Extension Key
display the Virtual Extension Key name or the name of
the extension it resides on.
0 = Secondary
Extension
Name
1 = Actual Station
Name
0
03
Show CLI
When set to a 0, the caller ID of a trunk call/station call
pointed to a virtual extension will not be displayed if
the virtual extension is not set to ring.
When set to a 1, the caller ID of a trunk call pointed to
a virtual extension WILL be displayed if the virtual
extension is not set to ring. Station calls to a virtual
that is not assigned to ring will display the station
name or number if PRG 15-18-04 is set to a 1.
0 = No CLI info
1 = Show CLI info
0 15-09-01
04
Show Internal Caller Information
When set to a 0, internal calls to the virtual extension
will not show the name or number of the extension
that is calling.
When set to 1, internal calls to the virtual extension
WILL show the name or number of the extension that
is calling if the virtual is assigned to ring or if PRG 15-
18-03 is set to a 1.
0 = Do not show
1 = Show
0 15-09-01
15-18-03
To Next Page
Loading...
General
