NEC Univerge SV9100 - Automatic Trunk-To-Trunk Transfer Target Setup

Issue 4.0
2-398 Program 24 : Hold/Transfer Setup
Description
Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign the Speed Dialing
number bin which should be used as the destination of the Automatic Trunk-to-Trunk Transfer.
Conditions
None
Feature Cross Reference

Call Forwarding, Off-Premise
Program 24 : Hold/Transfer Setup
24-04 : Automatic Trunk-to-Trunk Transfer Target Setup
Level:
IN
Input Data
Trunk Port Number 001~400
Item
No.
Day/
Night
Mode
Speed Dial
Area
Number
Default Description
Related
Program
01 1~8 0~9999 9999
The destination telephone number of the
Trunk-to-Trunk Transfer uses the number
registered into the Speed Dial. Use this
program to setup the Speed Dial Bin
Number.
11-10-08
13-04
24-05