NEC Univerge SV9100 - Softkey Display Prompts

Issue 4.0
SV9100 Programming Manual 1-7
SECTION 7 USING SOFTKEYS FOR PROGRAMMING
Each UNIVERGE SV9100 display telephone provides interactive Softkeys for
intuitive feature access. The options for these keys will automatically change
depending on where you are in the system programming. Simply press the Softkey
located below the option you wish and the display will change accordingly.
Pressing the VOLUME ▲ or VOLUME ▼ scrolls between the menus.
SECTION 8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN
When using a display telephone in programming mode, various Softkey options are
displayed. These keys will allow you to easily select, scan, or move through the
programs.
_
Program Mode
Base Service OP1 OP2
   
_
Program Mode
CCIS Hard Mtnance
   
Table 1-4 Softkey Display Prompts
Softkey Display Prompts
If you press this
Softkey . . .
The system will. . .
back
Go back one step in the program display.
You can press VOLUME
▲ or VOLUME ▼ to scroll forward or
backward through a list of programs.

Scroll down through the available programs.

Scroll up through the available programs.
select
Select the currently displayed program.

Move the cursor to the left.

Move the cursor to the right.
-1
Move back through the available program options.
+1
Move forward through the available program options.