NEC Univerge SV9100 Programming Manual

Issue 4.0
2-884 Program 90 : Maintenance Program
Description
Use Program 90-64 : SNMP Setup to configure the SNMP function.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-64 : SNMP Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
SNMP
0 = Disable
1 = Enable
0
02
Community Name
Max. 12 characters Public
03
Target Host 1
XX.XX.XX.XX 0.0.0.0
04
Target Host 2
XX.XX.XX.XX 0.0.0.0
05
Target Host 3
XX.XX.XX.XX 0.0.0.0
06
Target Host 4
XX.XX.XX.XX 0.0.0.0
07
Target Host 5
XX.XX.XX.XX 0.0.0.0
08
Domain Name
Max. 255 characters None
09
Trap Set Message
When set to Not Accept, the trap
message is sent to the SNMP
application for Major and Minor
alarms. When set to Accept, trap
messages are not sent until the
SNMP application makes a request.
0 = Not Accept
1 = Accept
0

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards