NEC Univerge SV9100 - DT800;DT700 Multiline CODEC Basic Information Setup

Issue 4.0
2-784 Program 84 : Hardware Setup for VoIP
Description
Use Program 84-24 : DT800/DT700 Multiline CODEC Basic Information Setup to set the CODEC of
each type of DT800/DT700 Multiline Telephone.
Program 84 : Hardware Setup for VoIP
84-24 : DT800/DT700 Multiline CODEC Basic Information Setup
Level:
IN
Input Data
Type 1 = Type 1
2 = Type 2
3 = Type 3
4 = Type 4
5 = Type 5
Item
No.
Item Input Data Default
01
Number of G.711 Audio Frames
Input the amount of audio in the packets when
using the G.711 CODEC.
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
2
02
G.711 Voice Activity Detection
0 = Disable
1 = Enable
0
03
G.711 Type
This decides the G.711 type. In North America,
typically u-law is used.
0 = A-law
1 = -law
1
04
G.711 Jitter Buffer (min)
0~300ms
20
05
G.711 Jitter Buffer (average)
0~300ms
40
06
G.711 Jitter Buffer (max)
0~300ms
80
07
Number of G.729 Audio Frames
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
2
08
G.729 Voice Activity Detection
0 = Disable
1 = Enable
0