NEC Univerge SV9100 - Service Code Setup (for Service Access)

Issue 4.0
2-120 Program 11 : System Numbering
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. You can customize additional Service Codes in Programs 11-10, 11-
11, and 11-13 through 11-16.
The following chart shows:
 The number of each code (01~59).
 The function of the Service Code.
 The type of telephones that can use the Service Code.
 The default entry. For example, dialing 770 (Item 05) cancels a previously set Camp-On.
 Programs that may be affected with the changing the code.
Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Level:
IN
Input Data
Item
No.
Item Terminals
Defaul
t
Related
Program
01
Bypass Call
Activate Call Forwarding/Do Not Disturb Override.
This code is available only if you disable the voice
mail Single Digit dialing code in Program 11-16-09.
MLT, SLT 707 11-16-09
02
Conference
MLT, SLT #1
03
Override (Off-Hook Signaling)
MLT, SLT 709
04
Set Camp-On
MLT, SLT 750
05
Cancel Camp-On
MLT, SLT 770
06
Switching of Voice Call and Signal Call
MLT, SLT 712
07
Step Call
MLT, SLT 708
08
Barge-In
MLT, SLT 710
09
Change to STG (Department Group) All Ring
MLT, SLT No
Setting
16-02
10
Station Speed Dialing
MLT, SLT #2