NEC Univerge SV9100 - Protection Mode Setup for Multiline Telephone

Issue 4.0
2-868 Program 90 : Maintenance Program
Description
Use Program 90-49 : Protection Mode Setup for Multiline Telephone to set the protection mode of
each multiline (IP) telephone.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-49 : Protection Mode Setup for Multiline Telephone
Level:
IN
NOTE

This program is available only via telephone programming and not through PC
Programming and Web Pro.
Input Data
Extension Number Up to eight digits
Item
No.
Item Input Data Default
01
Release Protection Mode
Release? (Yes : 1)
None
02
Initialize Protection Password
Initialize? (Yes : 1)
None