NEC Univerge SV9100 - ISDN Calling Party Number Setup for Trunks

Issue 4.0
SV9100 Programming Manual 2-347
Description
Use Program 21-12 : ISDN Calling Party Number Setup for Trunks to assign Calling Party Numbers
for each trunk (maximum 16 digits per entry). When a call is made by an extension which does not have
an Extension Calling Number assigned (Program 21-13), the system sends the calling number for the
ISDN trunk defined in 21-12.
Conditions
None
Feature Cross Reference

ISDN Compatibility
Program 21 : Outgoing Call Setup
21-12 : ISDN Calling Party Number Setup for Trunks
Level:
IN
NOTE

If the Calling Party Number is assigned in both Programs 21-12 and 21-13, the system
sends the data in Program 21-13.
Input Data
Trunk Port Number 001~400
Item
No.
Calling Party Number Data Default
01 1~0, , # (maximum 16 digits) No Setting