NEC Univerge SV9100 - SIP Stack Configuration Setup

Issue 4.0
SV9100 Programming Manual 2-85
Description
Use Program 10-67 : SIP Stack Configuration Setup to program SIP system base setting.
Conditions
 The SIP Stack cannot separate DNS Servers, only one DNS server can be used.
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-67 : SIP Stack Configuration Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Program
01
DNS Mode
Select whether
DNS mode is
enabled.
0 = Disable
1 = Enable
0
02
DNS IP Address
Set the IP
Address of DNS
Server.
xxx.xxx.xxx.xxx 0.0.0.0
03
DNS Port
Assign the DNS
Port.
0 ~ 65535 53
04
DNS Source
Port
Assign the DNS
Source Port.
0 ~ 65535 53
05
Request ReTx
Start Time
Assign the ReTx
Start Time.
0 ~ 65535sec. 5
06
Request
Maximum ReTx
Interval
0 ~ 65535sec. 40