NEC Univerge SV9100 - Backup Recovery Data

Issue 4.0
SV9100 Programming Manual 2-877
Description
Use Program 90-57 : Backup Recovery Data to backup the system data in the flash memory on the
GCD-CP10 and to make the recovery data.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-57 : Backup Recovery Data
Level:
IN
NOTE

This program is available only via telephone programming and not through PC
Programming.
Input Data
Data ID 1~5
Item
No.
Item Input Data
01
Backup Recovery Data
[Backup?] : Dial 1+ press Transfer
(Press Transfer to cancel.)