NEC Univerge SV9100 - Program 44: ARS;F-Route Setup; System Options for ARS;F-Route

SV9100 Programming Manual 2-549
Program: 44
Description
Use Program 44-01 : System Options for ARS/F-Route to define the system options for the ARS/F-Route
feature.
Conditions
None
Feature Cross Reference

Automatic Route Selection (ARS)
 Uniform Numbering Network
Program 44 : ARS/F-Route Setup
44-01 : System Options for ARS/F-Route
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
ARS/F-Route Time Schedule
If this option is set to 0, the F-Route table selected is
determined only by the digits dialed without any relation to
the day or time of the call.
If this option is set to 1, the system first refers to Program
44-10. If there is a match, the pattern defined in that
program is used. If not, the F-Route pattern in Program
44-09 and time setting in 44-08 are used.
0 = Not Used
1 = Used
0
02
Dial Tone Simulation
1 Digit (0~9)
(
, # cannot
be used)
None
03
Tone Type
0 = Internal
Dial Tone
1 = External
Dial Tone
0