NEC Univerge SV9100 - Power Saving Setup

Issue 4.0
SV9100 Programming Manual 2-237
Description
Use Program 15-27 : Power Saving Setup to set the power saving mode for extensions.
Conditions
None
Feature Cross Reference
None
Program 15 : Extension, Basic Setup
15-27 : Power Saving Setup
Level:
IN
Input Data
Extension Number 001 ~ 960
Item
No.
Item Input Data Default
01
Power Saving Group Number
0 = Power Save Off
1 ~32 = Power Save Group
0
02
Power Save during Power Failure
0 = Disable (Power supply)
1 = Enable (Power cut off)
0