NEC Univerge SV9100 - Class of Service Options (Incoming Call Service)

Issue 4.0
2-262 Program 20 : System Option Setup
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming call
feature availability for each extension Class of Service (COS).
Program 20 : System Option Setup
20-09 : Class of Service Options (Incoming Call Service)
Level:
IN
Input Data
Class of Service Number 01~15
Item
No.
Item
Input
Data
Default
Related
ProgramCOS
01~14
COS
15
01
Second Call for DID/DISA/DIL/E&M Override
Turn off or on the extension ability to receive a
second call from a DID, DISA, DIL, or tie line
caller.
 With this option set to 1, the
destination extension must be busy for a
second DNIS caller to ring through. If the
destination extension does not have a trunk
or CAP key available for the second call
and a previous call is ringing the extension
but has not yet been answered, the second
caller hears busy regardless of this
program setting.
0 = Off
1 = On
11
02
Caller ID Display
Turn off or on the Caller ID display at an
extension.
0 = Off
1 = On
0 0 15-02-08
03
Sub Address Identification
Define whether or not an extension displays
the Caller Sub-Address.
0 = Off
1 = On
00
04
Notification for Incoming Call List
Existence
Determine whether or not an extension display
shows Check List when an incoming call is
missed by a user.
0 = Off
1 = On
0 0 20-09-02