Issue 4.0
2-40 Program 10 : System Configuration Setup
Description
Use Program 10-21 : GCD-CP10 Hardware Setup to set up various hardware, such as the baud rate of
COM port and the switch for control on GCD-CP10 blade.
Program 10 : System Configuration Setup
10-21 : GCD-CP10 Hardware Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Program
04
External Source
I/O Selection on
GCD-CP10
Determines the
external music
source input/
output selection
for GCD-CP10
CN8 and CN9.
0 = External MOH (AUX2)/
External Speaker(AUX1)
1 = BGM source (AUX2)/ External
Speaker(AUX1)
2 = External MOH (AUX2)/BGM
source (AUX1)
Relationships between CN
number and Relay number are as
follows:
AUX2 = Relay2
AUX1 = Relay1
1
05
General
Purpose Relay
Switch
Selection on
GCD-CP10
0 = Off
1 = Relay 1 on GCD-CP10
2 = Relay 2 on GCD-CP10
0
06
Drive Timer
Setup
0~64800
0 = No Setting
1 = 0.1s
2 = 0.2s
3 = 0.3s
:
10 = 1.0s
:
64800 = 6480s
0
07
Modem Support
0 = Off
1 = On
0
To Next Page
Loading...
