NEC Univerge SV9100 - VRS;DISA Talkie Base Setup

Issue 4.0
SV9100 Programming Manual 2-419
Description
Use Program 25-16 : VRS/DISA Talkie Base Setup to assign VRS/DISA timer values.
Conditions
None
Program 25 : VRS/DISA Setup
25-16 : VRS/DISA Talkie Base Setup
Level:
IN
Input Data
Talkie Number 1~100
Item
No.
Item Input Data Default
01
VRSDISA Single Digit Timer
Assign a timer per single digit table, required to expire
before the allocated single digit entry is applied. (Related:
PRG25-06-02)
0 ~ 68400
0
02
DTMF Detect
Select whether or not system detects DTMF during VRS
message.
‘1 = On’ setting detects DTMF signal during sending VRS
message for VRS/DISA call.
‘0 = Off’ setting does not detect DTMF signal during sending
VRS message for VRS/DISA call. Related:
PRG25-02-01
PRG25-06-01
PRG15-01-08
PRG15-01-09
PRG40-10-08
PRG40-10-09
0 = Off
1 = On
1