NEC Univerge SV9100 - Netlink System Basic Setup

Issue 4.0
SV9100 Programming Manual 2-651
Description
Use Program 51-02 : NetLink System Basic Setup to set system data for each NetLink system.
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-02 : NetLink System Basic Setup
Level:
IN
Input Data
System ID 1~50
Item
No.
Item Input Data Default
01
System Name
Enter the name given to each system.
Up to 20 characters.
blank
02
Primary System Clock Hour Offset
Determine the time offset from the Primary system.
(0 = -12, 1 = -11, 2 = -10.... 12 = 0, 13 = +1, 14 = +2,
24 = +12)
This setting affects time display on MLT (see 51-13-02).
0~24
12
04
Authenticate System MAC Address
To use this function, set PRG 51-13-03 to 1 (enable),
NetLink systems reject the connection from
unauthenticated system access.
00-00-00-00-00-00~
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00