NEC Univerge SV9100 - Option Information Setup

Issue 4.0
SV9100 Programming Manual 2-31
Description
Use Program 10-16 : Option Information Setup to set up the option given from the DHCP server to
each client.
Program 10 : System Configuration Setup
10-16 : Option Information Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default
01
Router
Set the Router IP address.
Code number 0~255
3 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
02
DNS Server
Set IP address of DNS Server.
Code number 0~255
6 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
03
TFTP Server
Set the name for the TFTP
Server.
Code number 0~255
66 (Fixed)
Maximum 64 character strings
No setting
04
DRS
Code number 0~255
161 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
05
MGC
Code number 0~255
129 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
06
Client Host Name
Set the Client Host Name.
Code number 0~255
12 (Fixed)
Maximum 64 character strings
No setting