NEC Univerge SV9100 - PMS Service Setting

Issue 4.0
2-544 Program 42 : Hotel Setup
Description
Use Program 42-06 : PMS Service Setting to set the PMS integration settings when using PMS-U10
and PMS feature.
Program 42 : Hotel Setup
42-06 : PMS Service Setting
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
PMS Port Number
A system restart is required when changing this
program for the change to take affect.
0~65535
5129
02
3:00 AM Auto Room Scan
Set maid required status for all checked-in rooms at
3:00 AM.
0 = Off
1 = On
0
03
CheckIn Message Type
0 = Off
1 = On
0
04
CheckOut Auto Status Change
0 = Off
1 = On
0
05
AREYUTHERE/LINETEST Send Timing
1~128 (sec)
10
06
AREYUTHERE/LINETEST Send Count
0~20 (times)
3
07
Check-out Auto Flexible Status Change
When PRG42-06-07 and PRG42-06-04 are both
enabled, the status programmed in PRG42-06-08 is set
upon checkout regardless of the previous room status.
0 = Disable
1 = Enable
0
08
Status for Check-out Auto Flexible Status Change
When PRG42-06-07 is enabled the status programmed
in 42-06-08 is set upon checkout.
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
4