NEC Univerge SV9100 - Copy Program by Port Number

Issue 4.0
2-896 Program 92 : Copy Program
Description
Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each outside
line.
Conditions
None
Feature Cross Reference
None
Program 92 : Copy Program
92-03 : Copy Program by Port Number
Level:
IN
NOTE

This program is available only via telephone programming and not through PC
Programming.
Input Data
Item
No.
Item Input Data
01
Source Number
Enter the port number from where the data is to be copied.
02
Destination Number (From)
Enter the first port number where the information is to be
copied.
03
Destination Number (To)
Enter the last port number where the information is to be
copied. If the information is to be copied only to one port,
enter the information entered in the Destination Number
(From) entry.