NEC Univerge SV9100 - DID Trunk Group to Translation Table Assignment

Issue 4.0
2-380 Program 22 : Incoming Call Setup
Description
Use Program 22-13 : DID Trunk Group to Translation Table Assignment to assign the DID Trunk Groups to
DID Translation Tables. DID trunks should be in their own group. If you have more than one type of DID
trunk, put each type in a separate Trunk Group. For each Trunk Group, you make a Translation Table
entry for each Night Service mode.
Conditions
None
Feature Cross Reference

Direct Inward Dialing (DID)
Program 22 : Incoming Call Setup
22-13 : DID Trunk Group to Translation Table Assignment
Level:
IN
Input Data
Trunk Group Number 1~100
Item
No.
Day/Night Mode
Conversion Table
Area Number
Default
01 1~8 0~20
0 = No Setting
1