Issue 4.0
SV9100 Programming Manual 2-457
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to Internal Paging
Groups (i.e., Page Zones). The setting in this program also determines if the Internal Page Group can
receive Internal All Call Paging. The system can have up to 64 paging groups. An extension can be in
only one Internal Paging Group.
Conditions
None
Feature Cross Reference
Paging, Internal
Program 31 : Paging Setup
31-02 : Internal Paging Group Assignment
Level:
IN
Input Data
Extension Number 001 ~ 960
Item
No.
Item Input Data Default
01
Internal Paging Group Number
Assign extensions to Internal Paging Groups (i.e.,
Page Zones). The system allows up to 64 Internal
Paging Groups. An extension can be in only one
Internal Paging Group.
0~64
(0 = No Setting)
0 for IP Station
1 for TDM Station
02
Internal All Call Paging Receiving
Allow/Prevent All Call Internal Paging for each
extension. If allowed, extension can place and
receive All Call Internal Paging announcements. If
prevented, extensions can make only (not receive)
All Call Internal Paging announcements. If
combined, Paging zones should be restricted as
well, change the internal page zone group in
Program 31-07-01 to 0.
0 = Off
1 = On
0
To Next Page
Loading...
