NEC Univerge SV9100 - Digits Delete for T1 ANI Assignment

Issue 4.0
SV9100 Programming Manual 2-485
Description
Use Program 34-10 : Digits Delete for T1 ANI Assignment to delete the Information Digits received
from the Network on Feature Group D Trunks.
Example:
Conditions
None
Feature Cross Reference

T1 Trunking (with ANI/DNIS Ability)
Program 34 : Tie Line Setup
34-10 : Digits Delete for T1 ANI Assignment
Level:
IN
Input Data
Incoming Trunk Group No. 001~100
Item
No.
Item Input Data Default Description
01
Delete Digits for T1 ANI
Define the number of digits to
delete from the information
element received from Telco.
0~9 digits
2
Assign the number of
information digits to
delete from the element
received from the
Network.
Example of ANI information KP009727517645STKP7100ST.
00 Information digits
9727517645 ANI information
7100 DNIS Digits