NEC Univerge SV9100 - Program 32: Door Box and Sensor Setup; Door Box Timers Setup

SV9100 Programming Manual 2-467
Program: 32
Description
Use Program 32-01 : Door Box Timers Setup to assign the timers used for the Door Box.
Conditions
None
Feature Cross Reference

Door Box
Program 32 : Door Box and Sensor Setup
32-01 : Door Box Timers Setup
Level:
IN
NOTE

The Door Box feature is called Door Phone when programming via WebPro and using a
multiline terminal.
Input Data
Item
No.
Item Input Data Default
01
Door Box Answer Time
A multiline terminal user must answer Door Box chimes
during this time.
0~64800
(sec)
30
02
Door Lock Cancel Time
When a single line (2500 type) telephone user hook
flashes or a multiline terminal user presses the Recall key
while talking to a Door Box, the strike stays open for this
time.
0~64800
(sec)
10
03
Off-Premise Call Forward by Door Box Disconnect
Timer
Define the conversation period for an Off-Premise Call
Forward by Door Box call. When this timer expires, the
caller hears busy tone for three seconds (fixed time), and
the call is then disconnected.
0~64800
(sec)
60