NEC Univerge SV9100 - Location Setup

Issue 4.0
2-4 Program 10 : System Configuration Setup
Description
Use Program 10-02 : Location Setup to define the location of the installed system.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-02 : Location Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01
Country Code
Dial (up to
four digits):
0~9,
, #
1 Enter the country code.
02
International
Access Code
Dial (up to
four digits):
0~9,
, #
No setting Enter the international access
code.
03
Other Area
Access Code
Dial (up to two
digits):
0~9,
, #
9 Enter the other area access
code
04
Area Code
Dial (up to six
digits):
0~9,
, #
No setting Enter the local area code.
05
Trunk Access
Code
Dial (up to
eight digits):
0~9,
, #
No setting Enter the trunk access code
digits required to place an
outgoing call.