NEC Univerge SV9100 - E&M Tie Line Class of Service

Issue 4.0
SV9100 Programming Manual 2-475
Description
Use Program 34-02 : E&M Tie Line Class of Service to assign a Class of Service to a Tie line (there
are 15 Tie line Classes of Service). The Class of Service options are defined in Program 20-14. For each
Tie line, make a separate entry for each Night Service mode.
Conditions
Program 20-06 cannot be used to assign Class of Service to Tie lines.
Feature Cross Reference

Tie Lines
Program 34 : Tie Line Setup
34-02 : E&M Tie Line Class of Service
Level:
IN
Input Data
Trunk Port Number 1~400
Item
No.
Day/Night
Mode
Class Default
Related
Program
01 1~8 1~15 1 20-14