NEC Univerge SV9100 - Program 47: Inmail; SV8100 Inmail System Options

SV9100 Programming Manual 2-571
Program: 47
Description
Use Program 47-01 : SV8100 InMail System Options to set up the SV8100 InMail system-wide options.
Program 47 : InMail
47-01 : SV8100 InMail System Options
Level:
IN
Input Data
Item
No.
Item Input Data Default
02
SV8100 InMail Master Name
(MasterName)
The GCD-CP10 must be reset for a change to
this program to take effect.
Modify the name for all UNIVERGE SV9100
VM8000 InMail ports. The system briefly
displays this name when a display multiline
terminal user calls a Voice Mail port (either by
pressing Message, their voice mail key, or by
dialing the master number). You should always
end the name with the
## characters. The
system substitutes the port number for the last
#. Using the default name InMail
##, for
example, the telephone display shows InMail
#1 when calling port 1.
Up to 12 characters
InMail ##
(The system substitutes the
port number for the
# when
calling the port).