NEC Univerge SV9100 - ANI;DNIS Service Options

Issue 4.0
2-482 Program 34 : Tie Line Setup
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI//DNIS service option setup for E&M
Class of Service.
Program 34 : Tie Line Setup
34-09 : ANI/DNIS Service Options
Level:
IN
Input Data
Class of Service 01~15
Item
No.
Name Input Data
Default
Related
Program
COS 2~15
01
Receive Format
Specify the format of the ANI/DNIS data received
from the Telco. Make sure your entry is compatible
with the service the Telco provides. The character 
indicates a delimiter.
 If PRG34-01-02 is selected to 2 (MF),
this PRG works only as 4 =*ANI*DNIS*.
0 = Address
1 =
ANI
2 = DNIS
3 = ANIAddress
4 = ANIDNIS
5 = DNISANI
( = Delimiter Code)
0 34-01-02
34-09-02
02
Delimiter Dial Code
Define the character Telco uses as a delimiter (see
entries 1~5 in Item 1 above). Valid entries are 0~9,
#, and .
1~9, 0, #, 

34-09-01
03
Route Setup of Receive Dial
Specify the source of the data the system uses to
route incoming ANI/DNIS calls. If option 2 is
selected, refer to Program 34-09-04.
0 = Fixed Route (Item 08)
(No Routing)
1 = Routes on Received
DNIS or Address Data
2 = Routes on Received
ANI Data
0 22-09-01
22-11-01
34-09-04
34-09-08