NEC Univerge SV9100 - Call Progress Tone Detector Setup

Issue 4.0
SV9100 Programming Manual 2-685
Description
Use Program 80-04 : Call Progress Tone Detector Setup to define the various levels and timers for
the Call Progress Tone Detector.
Tone Detector Type:
 1 = Dial Tone for Trunk
 2 = Busy Tone for Trunk
 3 = Ring Back Tone for Trunk
 4 = Special Busy Tone for Trunk
 5 = Special Ring Back Tone for Trunk
Program 80 : Basic Hardware Setup for System
80-04 : Call Progress Tone Detector Setup
Level:
MF
Input Data
Tone Detector Type Number 1 = Dial Tone for Trunk
2 = Busy Tone for Trunk
3 = Ring Back Tone for Trunk
4 = Special Busy Tone for Trunk
5 = Special Ring Back Tone for Trunk
Item
No
Item Input Data
01
Detection Level
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm