NEC Univerge SV9100 - Incoming Extension Ring Group Assignment

Issue 4.0
SV9100 Programming Manual 2-365
Description
Use Program 22-04 : Incoming Extension Ring Group Assignment to assign extensions to Ring
Groups. Calls ring extensions according to Ring Group programming. Use Program 22-05 to assign
trunks to Ring Groups and use Program 22-06 to set the ringing for the phones. An Incoming Ring Group
(IRG) can have up to 48 extension numbers assigned.
Default
Extensions 101~108 (first eight ports) ring for incoming Ring Group 1 calls. No other extensions ring for
incoming Ring Group 1 calls.
Conditions
None
Feature Cross Reference

Ring Groups
Program 22 : Incoming Call Setup
22-04 : Incoming Extension Ring Group Assignment
Level:
SA
NOTE

There are 100 available Ring Groups.
Input Data
Incoming Ring Group Number 1~100
Input Data
Incoming Ring Group Extension 1~48 (default 1)
Item
No.
Extension
Number
Description
Related
Program
01 Maximum 8
Digits
Assign extensions (up to 48) to Ring Groups. Calls ring
extensions according to Ring Group programming.
22-02
22-05
22-06