NEC Univerge SV9100 - Program 13: Abbreviated Dialing; Speed Dialing Function Setup

SV9100 Programming Manual 2-147
Program: 13
Description
Use Program 13-01 : Speed Dialing Function Setup to define the Speed Dialing functions.
Conditions
None
Feature Cross Reference

Speed Dial – System/Group/Station
Program 13 : Abbreviated Dialing
13-01 : Speed Dialing Function Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default
Related
Program
01
Speed Dialing Auto Outgoing Call
Mode
Set whether the Speed Dial bins use
Trunk Routing (0) or dial the bin as
though it is an Intercom number (1).
0 = Trunk Outgoing
Mode
1 = Intercom
Outgoing Mode
0 13-05
02
--- Not Used ---
03
Number of Common Speed Dialing
Bins
Assign the number of Speed Dial bins
that are used for System Speed Dials.
0~10000
0 = No Common
Speed Dialing
1000 13-04
04
Trunk Access Routing
When set to 0, PRG13-05 defines a
trunk group in PRG14-05 to select a
trunk from. When set to 1, PRG13-05
refers to a trunk access route in
PRG14-06.
0 = Trunk Group
1 = Trunk Route
0 13-05
14-05
14-06
05
Speed Dial Digits Expansion
If set to 0 speed dial digits are three
If set to 1 speed dial digits are four
0 = Not expand
1 = Expand
0