NEC Univerge SV9100 - Incoming Virtual Extension Ring Tone Order Setup

Issue 4.0
SV9100 Programming Manual 2-219
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1~4) for
the Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an extension
simultaneously, the tone with the highest order number (e.g., 1) rings. The other keys only flash. There
are 512 Virtual Extension ports.
Default
 By default, Virtual Extension ring tones have the following order:
Program 15 : Extension, Basic Setup
15-10 : Incoming Virtual Extension Ring Tone Order Setup
Level:
SA
Input Data
Extension Number 1 ~ 960
Item
No.
Priority
Order
Data Description
Related
Program
01 1~4
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
When two or more virtual
extensions are set on a
function key on the telephone,
and the tone pattern by which
the sound of each extension
differs, the priority of ring
sound is set up.
15-08
Priority
Order
Ring Tone
(Set in Program 15-08)
1 0 (Tone Pattern 1)
2 1 (Tone Pattern 2)
3 2 (Tone Pattern 3)
4 3 (Tone Pattern 4)