NEC Univerge SV9100 - SIP Registrar;Proxy Information Basic Setup

Issue 4.0
SV9100 Programming Manual 2-57
Description
Use Program 10-33 : SIP Registrar/Proxy Information Basic Setup to set the registrar/proxy options
for SIP extensions.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-33 : SIP Registrar/Proxy Information Basic Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Registration Expire Time
After this time expires, the UAs are
forced to re-register with the CPU. This
allows the CPU to keep a current
location of the entire end UAs.
60 ~ 65535
3600
02
Authentication Mode
Check here if a password is desired for
the IP SIP phones to register. When
checked, 15-05-16 must have a
password entered and the SIP phone
must have the same password. When
using Authentication, the station
number is the authorization name.
0 = Disable
1 = Enable
0
03
SIP Registrar/Proxy Domain Name
Set the domain name of the SIP proxy.
Up to 64 Characters
None
04
SIP Registrar/Proxy Host Name
Set the domain name of the SIP proxy.
Up to 48 Characters
None
05
SIP Registrar/Proxy Information
Basic Setup - NAT Mode
0 = No (Disable)
1 = Yes ( Enable)
0