NEC Univerge SV9100 - Department Group Assignment for Extensions

Issue 4.0
SV9100 Programming Manual 2-243
Description
Use Program 16-02 : Department Group Assignment for Extensions to set the Department Groups.
The system uses these groups (64 Department Groups) for Department Calling. Assign pilot numbers to
Department Groups you set up in Program 11-07. This lets system users place calls to the departments.
Use Program 16-01 to set the priority of each extension in each Department Group. When a call comes
to the group, the extensions ring in order of their priority. 1
Conditions
None
Feature Cross Reference

Department Calling
Program 16 : Department Group Setup
16-02 : Department Group Assignment for Extensions
Level:
IN
Input Data
Extension Number 1 ~ 960
Item
No.
Group
Number
Priority Default Description
Related
Program
01 1~64 1~9999 1 – xxx
(See
Note)
Set up the Department Group called
by the pilot number and the extension
priority when a group is called.
Call Pickup Groups are set up in
23-02.
11-07
16-01
 The initial value of a priority becomes the ports numerical order assigned in Program 11-02
and 11-04. (Extension ports are 1~ 960. Virtual extension ports are 1~512.)