NEC Univerge SV9100 - Toll Restriction Data for E&M Tie Lines; Table

Issue 4.0
SV9100 Programming Manual 2-481
Description
Use Program 34-08 : Toll Restriction Data for E&M Tie Lines to define the toll restriction data for
E&M Tie Lines. This data should be defined if Tie Line Toll Restriction is enabled in Program 21-05-13.
Conditions
None
Feature Cross Reference

Tie Lines
Program 34 : Tie Line Setup
34-08 : Toll Restriction Data for E&M Tie Lines
Level:
IN
Input Data
Class of Service 01~15
Item
No.
Table
No.
Dial Data Default
Related
Program
01 01~20 Up to 10 Digits (0~9, , #) No Setting 21-05-13