Issue 4.0
SV9100 Programming Manual 2-133
Description
Use Program 11-19: Remote Conference Group Pilot Number to assign the remote conference pilot
number for each Remote Conference Group. This is the number a user dials to call into the Remote
Conference.
You must use unassigned extension numbers (e.g., 500) for the pilot number. If you want to use an
extension number which, by default, has a port number assigned (for example: in the 101~199,
3101~3257), first remove the default assignment. For example, to use extension number 125 as a
Remote Conference pilot number, first give extension port 025 a different extension assignment.
Conditions
None
Feature Cross Reference
None
Program 11 : System Numbering
11-19 : Remote Conference Group Pilot Number
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Remote Conference Group Pilot Number
Enter the pilot number for remote conference.
Must work within current
system dialing plan
blank
To Next Page
Loading...
