Issue 4.0
2-652 Program 51 : NetLink Service
Description
Use Program 51-03 : NetLink Internet Protocol Address List Setting to set the IP address of the
NetLink system.
Conditions
When there is no Primary System yet, or Fail Over occurs, Node List is referred to establish new link.
This setting is necessary when PRG 51-01-03 is 0, or PRG 51-05-02 is other than 0. Once the system
connects to the Primary System, this setting is updated by the Primary system when PRG 51-13-01 is
on. So, enter IP address of the systems that may become Primary at least.
Feature Cross Reference
None
Program 51 : NetLink Service
51-03 : NetLink Internet Protocol Address List Setting
Level:
IN
Input Data
List ID 1~50
Item
No.
Item Input Data Default
01
Internet Protocol Address List
The system seeks the Primary system based on this list.
When there is no Primary system yet, or Fail-Over occurs,
Node List is referred to establish new link. This setting is
necessary when PRG 51-01-03 is 0, or PRG 51-05-02 is other
than 0.
Once the system connects to the Primary System, this setting
is updated by the Primary system when PRG 51-13-01 is On.
So, enter IP address of the systems that may become Primary
at least.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
To Next Page
Loading...
