NEC Univerge SV9100 - Programming Password Setup

Issue 4.0
2-814 Program 90 : Maintenance Program
Description
Use Program 90-02 : Programming Password Setup to set the system passwords. For password entry, the
system allows eight users to be defined. Each user can have a:
 Unique alphanumeric name (up to 10 alphanumeric characters)
 Password entry of up to eight digits (using 0~9, # and )
 Password level
The IN level password is used by the System Installer for system programming. The SA or SB level
password cannot access the IN level programs. The reverse type (white on black) just beneath the
Description heading is the program access level. You can only use the program if your access level
meets or exceeds the level the program requires. (SA level password can access to SA or SB programs,
and SB level password can access to SB programs only.)
Program 90 : Maintenance Program
90-02 : Programming Password Setup
Level:
IN
CAUTION
Before changing your numbering plan, use the PC Programming or WebPro
Programming to make a backup copy of your system data.
Input Data
User Number 1~8
Item
No.
Item Input Data
01
User Name
Maximum 10 characters
02
Password
Up to 8 digits
03
User Level
0 = Prohibited User
1 = MF (Manufacturer Level)
2 = IN (Installer Level)
3 = SA (System Administrator Level 1)
4 = SB (System Administrator Level 2)
5 = UA (User Programming Level 1)