Issue 4.0
SV9100 Programming Manual 2-223
Description
Use Program 15-13 : Loop Key Data to set the Loop Key Data for each terminal. Loop Keys can be
Incoming, Outgoing, or both ways. Outgoing Loop Keys use the entry in Item 01. Incoming Loop Keys
use the entry in Item 02. Both Way Loop Keys follow the entries in both Items 01 and 02.
Conditions
None
Feature Cross Reference
Loop Key
Program 15 : Extension, Basic Setup
15-13 : Loop Key Data
Level:
IN
Input Data
Extension Number 001 ~ 960
Key Number 01~48
Item
Number
Item Input Data Default
01 Outgoing Option
0~8 or 0~100
(0 = Assigns the Loop Key for
ARS, 1~100 = Assigns the
Loop Key to the trunk group
specified.)
Programmable Function Key
Number 01~32:
Outgoing Option - 0 (Assigns the
Loop Key for ARS)
Incoming Option - 0 (Assigns the
Loop Key to all trunk groups)
02 Incoming Option
0~8 or 0~100
(0 = Assigns the Loop Key to all
trunk groups, 1~100 =
Assigns the Loop Key to the
trunk group specified.)
To Next Page
Loading...
