NEC Univerge SV9100 - Delete Recovery Data

Issue 4.0
SV9100 Programming Manual 2-879
Description
Use Program 90-59 : Delete Recovery Data to select and delete the recovery data stored in the flash
memory of the GCD-CP10.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-59 : Delete Recovery Data
Level:
SA
NOTE

This program is available only via telephone programming and not through PC
Programming.
Input Data
Data ID 1~5
Item
No.
Item Input Data
01
Delete Recovery Data
[Delete?] : Dial 1+ press Transfer
(Press Transfer to cancel.)