NEC Univerge SV9100 - Dial Extension Analyze Table

Issue 4.0
2-134 Program 11 : System Numbering
Description
Use Program 11-20 : Dial Extension Analyze Table to define the dial type based on three or more digits.
This program is relevant only if digits in 11-01-01 are set to 9 (Dial Extension Analyze).
Default
 Dial Extension Analyze Tables are not set at default.
Conditions
 When the system uses the Dial Extension Analyze Table to determine the dial type, the lower table
has priority. For example, if Table 1 has 211 defined and Table 2 has 2113 defined, Table 1 is used to
determine the dial type.
Feature Cross Reference
None
Program 11 : System Numbering
11-20 : Dial Extension Analyze Table
Level:
IN
Input Data
Dial Extension Analyze Table 01~128
Item No. Dial Extension Analyze Table
01 Dial (Up to eight digits: 0, 1~9, #, , @)
02 Type of Dials:
0 = None
1 = Service Code
2 = Extension Number
5 = Operator Access
6 = F-Route Access