NEC Univerge SV9100 - Netlink Primary Automatic Integration Setting

Issue 4.0
2-656 Program 51 : NetLink Service
Description
Use Program 51-06 : NetLink Primary Automatic Integration Setting to set the automatic integration
of the Primary system.
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-06 : NetLink Primary Automatic Integration Setting
Level:
IN
Item
No.
Item Input Data Default
01
Primary Integration Right or Wrong
When LAN cable was divided, multiple Primary systems may
appear. If the LAN connection is recovered, multiple Net-Links
exist in the network. When this option is enabling, NetLink is
composed around Top priority Primary System.
0 = Off
1 = On
0
02
Package Reset Timing Option
When Primary System Automatic Integration is done, all packages
of secondary systems reset. Select the timing of package reset.
0 = Reset when all
packages are idle.
1 = Anytime
0