NEC Univerge SV9100 - Trunk Ring Tone Range

Issue 4.0
SV9100 Programming Manual 2-363
Description
Use Program 22-03 : Trunk Ring Tone Range to select the ring tone range for the trunk. The trunk
uses a ring tone in the range selected when it rings an extension. Eight ring tones are available.
Customize the Trunk Ring Tones in Program 82-01.
Program 22 : Incoming Call Setup
22-03 : Trunk Ring Tone Range
Level:
IN
Input Data
Trunk Port Number 001~400
Item
No.
Ring Tone Pattern Default Description
Related
Program
01 0~3 = Tone Pattern 1~4
4~8 = Melody 1~5
9~12 = Tone Pattern 5~8
0
Select the ring tone range for the trunk.
The trunk uses a ring tone in the range
selected when it rings an extension.
Eight ring tones are available.
15-02
Table 2-8 Program 22-03 – Incoming Signal Frequency Patterns
Incoming Signal
Frequency Pattern
Type Frequency 1 Frequency 2 Modulation
Pattern 1 High
Middle
Low
1100Hz
660Hz
520Hz
1400Hz
760Hz
660Hz
16Hz
16Hz
16Hz
Pattern 2 High
Middle
Low
1100Hz
660Hz
520Hz
1400Hz
760Hz
660Hz
8Hz
8Hz
8Hz
Pattern 3 High
Middle
Low
2000Hz
1400Hz
1100Hz
760Hz
660Hz
540Hz
16Hz
16Hz
16Hz
Pattern 4 High
Middle
Low
2000Hz
1400Hz
1100Hz
760Hz
660Hz
540Hz
8Hz
8Hz
8Hz
Pattern 5 High
Middle
Low
1400Hz
760Hz
660Hz
540Hz
540Hz
540Hz
16Hz
16Hz
16Hz