NEC Univerge SV9100 - Dial Block Restriction Class Per Extension

Issue 4.0
SV9100 Programming Manual 2-345
Description
Use Program 21-10 : Dial Block Restriction Class Per Extension to define the Toll Restriction Class
to each extension when the extension is set for Dial Block Restriction. If this data is 0, Toll Restriction
Class follows Program 21-09-01.
Conditions
None
Feature Cross Reference
None
Program 21 : Outgoing Call Setup
21-10 : Dial Block Restriction Class Per Extension
Level:
IN
Input Data
Extension Number 001~960
Item
No.
Toll Restriction
Class
Default
01 0, 1~15
(0 = No Setting)
0