NEC Univerge SV9100 - VRS;DISA Error Message Assignment

Issue 4.0
SV9100 Programming Manual 2-407
Description
Use Program 25-05 : VRS/DISA Error Message Assignment to assign the VRS message number to
be used as the Automated Attendant error message. For each VRS/DISA trunk that the VRS answers,
enter the VRS message (1~100) the outside caller hears if they dial incorrectly. If you enter 0 (i.e., no
error message), the call reroutes according to Program 25-03 and 25-04.
Conditions
None
Feature Cross Reference

Direct Inward System Access (DISA)
Program 25 : VRS/DISA Setup
25-05 : VRS/DISA Error Message Assignment
Level:
IN
NOTE

For each trunk, make a separate entry for each Night Service mode.
Input Data
Trunk Port Number 001~400
Item
No.
Day/Night
Mode
VRS Message
Number
Default
01 1~8 0~100
0 = No Setting
0