NEC Univerge SV9100 - System Options for Multiline Telephones

Issue 4.0
SV9100 Programming Manual 2-249
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Programming
01
Trunk Group Key Operation Mode
0 = Display
1 = No Display
1
Mode: 0 = Display
1 = No Display
Incoming: 300 IPM Red blink
Talking: Green
Lighting (on
Talking TEL)
LED Off
Holding: 60 IPM
Green blink
(on holding
TEL)
LED Off
02
Trunk Group Access Key
Operating Mode
Set the operating mode of the
extension trunk group keys. The keys
are for incoming access, outgoing
access, or both.
0 = Outgoing/Incoming
1 = Outgoing
2 = Incoming
0
04
Retrieve the Line After Transfer
Enable (1)/Disable (0) an extension
ability to answer a call after it has
been transferred, but before it is
answered.
0 = Not Holding (No Keep)
1 = Holding (Keep)
1 20-09-07
05
Headset Busy Mode
Set the conditions under which a
headset extension is busy to
incoming callers.
0 = No (Disable)
1 = Yes (Enable)
0